AD-305

What is it used for?

‍ AD-305 is a powder additive that facilitates the release of plastic parts made by injection or blow molding. It is produced with high-purity fatty acids to ensure consistent quality. ‍ Main Benefits It lowers the coefficient of friction between the part and the mold. It releases parts automatically during production without the need to apply a release-agent aerosol. Efficient performance: low cost and easy application. ‍ Plastic resins where it can be used It can be used with a wide range of plastic resins such as: High-Density Polyethylene Low-Density Polyethylene Linear Low-Density Polyethylene Polypropylene General-Purpose Polystyrene High- or Medium-Impact Polystyrene PVC compounds SAN TPU EVA ‍ Suggested Dosage Application Suggested amount Injection / Blow molding 1 g per kilogram of resin Additional adjustments Increase only if necessary ‍ How to use it Weigh the appropriate amount of additive according to the resin. Mix it with the other additives. Mix for 5 minutes. Add the color concentrate. Mix for another 7 minutes. ‍ How it works during molding When heated, the additive melts inside the molten plastic. As it cools, it begins to migrate toward the surface. It forms an internal layer that helps release the part. ‍ Important With short carbon chains, migration is faster. It may create a light layer on the part that can affect surface decoration such as screen printing, hot stamping, or labeling. If the decorative finish is critical, we recommend evaluating products with a long carbon chain (such as AD-319 Slip L). ‍ Minimum Order Authorized distributors: From 1 kilogram Online store: from 1 kilogram Corporate sales: from 1 kilogram ‍ Packaging and Availability Packaging:

• 1 kg bags
• 25 kg boxes

Availability:

• Authorized distributors
• Online store
• Corporate sales

‍

‍